bitcoin-cli addnode – ChainQuery

XGC Goat Cheese

You like goat cheese? God damn right you do.

Fun with low fee TXNs on Mainnet

Here's a 0.493 sat/vB TXN I put on mainnet today. You'll have to use the SoChain block explorer to see it though. I give it a 3% chance of getting confirmed, but we'll wait and see. The TXN is a donation to [email protected] since I use their seeder for my network herder.
So last month, I voiced the unpopular opinion that node operators should lower the minrelaytxfee setting to allow low-fee TXNs to propagate more freely throughout the network. Then I asked why miners weren't mining 0.999 sat/vB TXNs during idle periods since it should be more profitable than mining no TXNs at all. Finally I wrote a node herder to walk the network looking for node operators that were running minrelaytxfee below the default (1000 sat). After walking about 26% of the network, turns out about 5% of nodes are allowing low fee TXNs.
So in that vein of discussion, I decided to just sign some low-fee TXNs and send them to the 5% of nodes I found and see what happens. To my surprise it showed up on one of the 23 block explorers I tried after broadcasting it. Surprisingly, that comes out to about 5% of explorers accepting low fee TXNs as well. So hopefully 5% or so of the miners will confirm low fee TXNs. We'll see.
BTW, to do this, this is what I did.
  1. Pair my HW wallet to Electrum
  2. Use the paytomany Electrum API to craft a TXN below 1 sat/vB
  3. Import the TXN to sign in Electrum
  4. Ran a full node with minrelaytxfee set to 1 sat (0.001 sat/vB)
  5. Walked the network to find a good number of low-fee peers
  6. Use bitcoin addnode API to herd my node to the low-fee peers I discovered.
  7. Use bitcoin sendrawtransaction API to broadcast TXN
Wait and see if it can propagate to a miner and if a miner will accept it.
BTW, there is a PR to lower the minrelaytxfee in core, but it's dragged on for years. The setting was lowered about every year or so in the early days, but hasn't been touched for many years now.
submitted by brianddk to Bitcoin [link] [comments]

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs:
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2
How to CPU Mine NewEnglandcoin (NENG) in macOS
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at:
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up:
NENG v1.4.0 Android Mining, randomSpike Evaluation
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal
NENG Security, Decentralization & Valuation
Whitepaper v1.0
Step by step guide on how to setup an explorer:
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf):
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE):
MacOS Wallet (10.11 El Capitan or higher):
Android with GNUroot on 32 bits old Phones (alpha release) wallet:
Windows wallet:
addnode ip address for the wallet to sync faster, frequently updated conf file:
How to Sync Full Node Desktop Wallet
Cheetah CPU Miner Software
Solo Mining with GPU or ASIC
How to Run Two Full Node in Same Desktop PC
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
Cminors' Pool
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows
Dec 31, 2018 - Technical Whitepaper is Released
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC
Nov 29, 2018 - A Warning to ASIC Miners
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

08-21 10:34 - 'I finally finished an altcoin with working mining, wallet etc. However when I tried to run a main node on AWS I could not for the life of me get my local client to connect.' (self.Bitcoin) by /u/AthP2121 removed from /r/Bitcoin within 67-77min

I opened all ports on AWS, put in the DNS and public address under “addnode” yet still nothing. Is this a common issue with AWS?
(Please let me know if you want any more details on the project)
I finally finished an altcoin with working mining, wallet etc. However when I tried to run a main node on AWS I could not for the life of me get my local client to connect.
Go1dfish undelete link
unreddit undelete link
Author: AthP2121
submitted by removalbot to removalbot [link] [comments]

Time to update to latest namecoin client. We are here to help.

submitted by samurai321 to Namecoin [link] [comments]

A tour of the Gridcoin wallet

Hey guys, I thought I would put together an in-depth tour of the Gridcoin wallet software for all of our recent newcomers. Here I'll be outlining all the features and functions the windows GUI wallet has to offer, along with some basic RPC command usage. I'll be using the windows wallet as an example, but both linux and macOS should be rather similar. I'll be including as many pictures as I can as embedded hyperlinks.
Edit: Note that since I originally made this there has been a UI update, so your client will be different colors but all the button locations are in the same place.
This is my first post like this, so please forgive me if this appears a little scatter-brained.
This will not cover the mining setup process for pool or solo miners.
When you launch the wallet software for the first time you should be greeted with this screen.


After that prompt, you should be left sitting on the main overview tab with several fields on it.
From top to bottom:


Now onto the other tabs on the left side. Currently we're on the Overview tab, lets move down to the Send tab. This tab it pretty self-explanatory, you use it if you want to send coins, but I'll go over the fields here:
  • Pay To: Enter a valid gridcoin address to send coins too. Gridcoin addresses always start with an S or and R.
  • Label: Enter a label here and it will put that address in your "address book" under that label for later use. You can leave it blank if you don't want it in your address book.
  • Message: Enter a message here if you want it attached to your transaction.
  • Amount: How many coins you want to send.
  • Add Attachment: Leave this alone, it is broken.
  • Track Coins: This doesn't do anything.


Now down to the Receive tab. Here you should have a single address listed. If you double click on the label field, you can edit it's label.
  • New: Generate a new address.
If you click on an address, the rest of the options should be clickable.
  • Copy: Copy the selected address to your clipboard.
  • Show QR Code: Show a scan-able QR code for the selected address.
  • Sign Message: Cryptographically sign a message using the selected address.


The Transactions tab is pretty boring considering we have no transactions yet. But as you can see there are some sorting tools at the top for when you do have transactions listed.


The Address Book is where all the addresses you've labeled (that aren't yours) will show up.
  • Verify Message: Verifies a message was signed by the selected address.
The rest of the functions are similar to the functions on the Receive tab.


Onto the Voting tab. There wont be any polls because we aren't in sync yet.
  • Reload Polls: Pretty self-explanatory, I've never had to use this.
  • Load History: By default, the wallet will only display active polls. If you want to view past polls you can use this.
  • Create Poll: You can create a network-wide poll. You must have 100,000 coins as a requirement to make a poll. (Creating a poll does not consume the coins)
Here's what the Voting tab will look like once you're in sync


Now onto the context bar menus on the top.
Under File you have:
  • Backup Wallet/Config: This lets you backup your wallet configuration file just in case.
  • Export: You can export your Transactions tab or Address Book in CSV format.
  • Sign message: Does the same thing as on the Receive tab.
  • Verify message: Does the same thing as on the Address Book tab.
  • Exit: Close the wallet.
Under Settings you have:
  • Encrypt Wallet: Encrypts your wallet with a password. (we'll come back to this)
  • Change Passphrase: Allows you to change your encryption password.
  • Options: Opens the options menu. (We'll come back to this)
Under Community you have:
Under Advanced you have:
  • Advanced Configuration: Opens the Advanced Configuration menu. (Not so advanced if you ask me)
  • Neural Network: Allows you to view solo miners project statistics. It will be largely blank if you're not in sync yet.
  • FAQ: Don't touch this, It is broken.
  • Foundation: Don't touch this, It is broken.
  • Rebuild Block Chain: Starts the client syncing from 0. Don't worry, using this will not make you lose coins.
  • Download Blocks: Downloads the latest official snapshot, can help speed up syncing. The download progress tends to sit at 99.99% for a long time, don't worry, it's working.
Under Help you have:
  • Debug window: Opens the debug window. (We'll come back to this)
  • Diagnostics: Don't touch this, it is broken. This has since been fixed. You can use this to see if there is anything wrong with your setup.
  • About Gridcoin: Opens the About Dialog. This gives you your client version and other information.


Now back to the options menu under Settings > Options.
Here we have the options menu main tab:
  • Pay transaction fee: The transaction fee that will be automatically paid when you make a transaction.
  • Reserve: You can reserve an amount so that it will always be available for spending.
  • Start Gridcoin on system login: Pretty self-explanatory
  • Detach databases at shutdown: Speeds up shutdown, but causes your blockchain file to no longer be portable.
On the Network tab:
  • Map port using UPnP: Attempts to connect to nodes through UPnP.
  • Connect through SOCKS proxy: Allows you to connect through a proxy.
The window tab is pretty self-explanatory.
The Display tab is also pretty self-explanatory, with the exception of:
  • Display coin control features (experts only!): This allows you to have a great deal of control over the coins in your wallet, check this for now and I'll explain how to use it further down. Don't forget to click "Apply".


Now that all of that is out of the way. The first thing you'll want to do is encrypt your wallet. This prevents anybody with access to your computer from sending coins. This is something I would recommend everyone do.
Go to Settings > Encrypt Wallet and create a password. YOU CANNOT RECOVER YOUR COINS IF YOU FORGET YOUR PASSWORD.
Your wallet will close and you will have to start it up again. This time when it opens up, you should have a new button in the bottom left. Now if you want to stake you will have to unlock your wallet. Notice the "For staking only" box that is checked by default. If you want to send a beacon for solo mining or vote, you will need to uncheck this box.


Before we continue, Let's wait until we're in sync. Depending on your internet speeds, this could take from several hours to over a day or 2. This can be sped up by using Advanced > Download Blocks, but this can still take several hours.
This is what an in-sync client should look like. Notice the green check to the right of the Receive tab. All of these icons give you information when you hover your mouse over them.
The lock
The arrow tells you if you're staking. If you aren't staking, it will tell you why you're not staking. If you are staking it will give you an estimated staking time. Staking is a very random process and this is only an estimate, not a countdown.
The connection bars tell you how many connections to the network you have.
The check tells you if you're in sync.


Now I've said "stake" about a million times so far and haven't explained it. Gridcoin is a Proof of Stake (PoS) coin.
Unlike bitcoins Proof of Work (PoW), PoS uses little system resources, so you can use those resources for scientific work. PoS works by users "Staking" with their balance. The higher the balance, the higher the chance to create, or "stake" a block. This means you need to have a positive balance in order to stake. Theoretically, you can stake with any amount over 0.0125 coins, but in practice it's recommended to have at least 2000 coins to reliably stake.
Staking is important for solo miners, because they get paid when they stake. Pool miners don't need to stake in order to get paid however. So if you want to solo mine, you'll need to buy some coins from an exchange or start in the pool first and move to solo when you have enough coins.
In addition to Research Rewards for miners, anyone who holds coins (solo miners, pool miners, and investors) gets 1.5% interest annually on top of your coins. So it can be beneficial for pool miners to stake as well.
Here is a snippet of what a research rewards transaction looks like from my personal wallet. I have a label on that address of "Payout address" as you can see here.


At this point you'll need some coins. You can use one of our faucets like this one or this one to test coin control out.
First let me explain what a UTXO is. UTXO stands for Unspent Transaction Output. Say you have an address with 0 coins in it, and someone sends you 10 coins like I've done here. Those 10 coins are added to that address in the form of a UTXO, so we have an address with one 10 coin UTXO in it.
Now we receive another 5 coins at the same address, like so. Now we have an address with one 10 coin UTXO and one 5 coin UTXO. But how do we view how our addresses are split up into different UTXOs?
Earlier we checked the "Display coin control features" box in Settings > Options > Display. Once that's checked you'll notice there's another section in the Send tab labeled "Coin Control Features". If you click the "Inputs" button, you'll get a new window. And look, there's our 2 UTXOs.
All UTXOs try to stake separately from each other, and remember that the chance a UTXO has to stake is proportional to it's size. So in this situation, my 10 coin UTXO has twice the chance to stake as my 5 coin UTXO. Now wallets, especially ones that make a lot of transactions, can get very fragmented over time. I've fragmented my wallet a little so I can show you what I'm talking about.
How do we clean this up? We can consolidate all this into one UTXO by checking all the boxes on the left and selecting OK.
Now pay attention to the fields on the top:
  • Quantity: The total amount of UTXOs we have selected.
  • Amount: The total amount of coins we have selected.
  • Fee: How much it would cost in fees to send all those UTXOs (more UTXOs = more transaction data = more fees)
  • After Fee: Amount - Fees.
  • Bytes: How large the transaction is in bytes.
  • Priority: How your client would prioritize making a transaction with this specific set of UTXOs selected had you not used coin control.
  • Low Output: If your transaction is less than 0.01 coins (I think).
  • Change: What you will get back in change.
  • custom change address: You can set the address you get your change back at, by default it will generate a new address.
So let's fill out our transaction so we end up with 1 UTXO at the end.
In "Pay To:" Just put any address in your wallet, and for the amount put what it has listed in the "After Fee" Field. Just like this.
Notice how we get no change back.
Now click "Send", we'll be prompted to enter our passphrase and we're asked if we want to pay the fee, go ahead and click "Yes".
Now if we go back to the Overview tab we get this funky icon. If you hover your mouse over it, it says "Payment to yourself", and the -0.0002 GRC is the network transaction fee.
(Ignore the first one, that was me fragmenting my wallet)
Now if we look at the Coin Control menu, we can see that we've slimmed our wallet down from 7 UTXOs to 1.
Now why would you want to use coin control?
2 Situations:
  1. UTXOs less than 0.0125 coins cannot stake. So you can combine a lot of tiny, useless UTXOs into 1 bigger one that can stake.
  2. After a UTXO stakes, it cannot stake for another 16 hours. So if you have 1 large UTXO that is big enough to stake more than once every 16 hours, you can split it into smaller UTXOs which can allow you to stake slightly more often.
  3. By default, the wallet will always generate a new address for change, which can make your wallet get very messy if you're sending lots of transactions. Keep in mind that more UTXOs = larger transactions = more fees.
Sidenote - When you stake, you will earn all research rewards owed reguardless of which UTXO staked. However, you'll earn the 1.5% interest for that UTXO. Not your whole wallet.


A fork is when the network splits into multiple chains, with part of the network on each chain. A fork can happen when 2 blocks are staked by different clients at the same time or very close to the same time, or when your client rejects a block that should have been accepted due to a bug in the code or through some other unique circumstance.
How do I know if I'm on a fork?
Generally you can spot a fork by looking at the difficulty on your Overview tab. With current network conditions, if your difficulty is below 0.1, then you're probably on a fork.
You can confirm this by comparing your blockhash with someone elses, like a block explorer.
Go to [Help > Debug Window > Console]. This is the RPC console, we can use to do a lot of things. You can type help to get a list of commands, and you can type help [command you need help with] (without the brackets) to get information on a command. We'll be using the getblockhash [block number] command.
Type getblockhash [block number] in the console, but replace [block number] with the number listed next to the "Blocks:" field on the Overview tab.
This will spit out a crazy string of characters, this is the "blockhash" of that block.
Now head over to your favorite block explorer, I'll be using gridcoinstats. Find the block that you have the hash for, use the search bar or just find it in the list of blocks.
Now compare your hash with the one gridcoinstats gives you. Does it match?
If it matches, then you're probably good to go. If it matches but you still think you're on a fork, then you can try other block explorers, such as or
If it doesn't match, then you need to try to get off that fork.
How do I get off a fork?
  1. Just wait for an hour or two. 95% of the time your client is able to recover itself from a fork given a little time.
  2. Restart the client, wait a few minutes to see if it fixes itself. If it doesn't restart again and wait. Repeat about 4 or 5 times.
  3. Find where the fork started. Using the getblockhash command, go back some blocks and compare hashes with that on a block explorer so you can narrow down what the last block you and the block explorer had in common. Then use reorganize [the last block hash you had in common]. Note that reorganize takes a blockhash, not a block number.
  4. Use Advanced > Download Blocks.
  5. If none of this works, you can take a look at social media (reddit/steemit) and see what other people are saying.


Your configuration file depends on your operation system:
  • On Windows: %appdata%\GridcoinResearch\
  • On Linux: ~/.GridcoinResearch/
  • On MacOS: /Users/USERNAME/Library/Application/Support/GridcoinResearch/
And it should look like this.
If you open up your gridcoinresearch.conf, you'll see the default one it generated. Note that if you entered your email earlier, the first line will have your email on it instead of "investor". If you decided you want to solo mine but didn't enter your email when you first started the wallet, go ahead and put your email on the first line in place of "investor". If you're a pool miner, just leave it as "investor".
Next, it's recommended that you use the addnodes on the gridcoin wiki. So our gridcoinresearch.conf will look like this.
A useful line for solo miners is PrimaryCPID=[YOUR CPID]. Sometimes your wallet can pick up on the wrong CPID so it's good to have that in there if you're solo mining.


A listening node is a node that listens for blocks and transactions broadcasted from nodes and forwards them on to other nodes. For example, during the syncing process when you're getting your node running for the first time, you're downloading all the blocks from listening nodes. So running a listening node helps support the network.
Running a gridcoin listening node is simple. All you need to do is add listen=1 to your gridcoinresearch.conf and you need to forward port 32749 on your router.
If you don't know how to port forward, I'd suggest googling "How to port forward [your router manufacturer]".

QUICK LINKS Official Website Unofficial Website Block Explorer Block Explorer Faucet Faucet
Gridcoin Wiki
Gridcoin Github
Arikado Pool
And that's all I have for now!
I plan to keep this post up-to-date with changes in the client. So if anyone has any suggestions, have clarifications they want made, or maybe I got something wrong, then please feel free to leave a comment below or PM me!
submitted by Personthingman2 to gridcoin [link] [comments]

Gridcoin Leisure Update Released

Today we have a new leisure update for you. This version includes a lot of "under the hood" changes, but there are some improvements for the average user as well.
Notably this release includes a better time to stake calculation method, thanks to @jamescowens. Also the Neural Network runs much smoother thanks to many optimizations by @ifoggz.
Download the update from GitHub here.
The Windows MSI can be downloaded here.
Full Release Notes:
Thank you to all the developers who contributed to this release. I will update this post when the Windows MSI has been uploaded to the website.
submitted by barton26 to gridcoin [link] [comments]

PIVX Core Wallet 3.0.5 final release (November 13th, 2017) - Mandatory Upgrade

Github release link
Forum Post

Important Notes

Upgrade instructions

1- Download the appropriate release for your platform from the Github release link. For command line installs/updates this link may help.
2- Start up your client and see if you are on the wrong chain by using this link (Am I forked?) or manually comparing your latest block hash against the [block explorer](
3- If you are on the correct chain, let it fully sync (or as far as it will go) and then repeat step 2. If you are still on the right chain move on to step 4. If you're on the wrong chain, download the chainstate from this link (mirror) and follow the instructions to install it. Do NOT delete wallet.dat or your backups folder. Once this is done, restart your client and let it finish syncing
  1. stop your wallet and/or daemon
  2. locate the folder with the blockchain folders (usually ~/.pivx/)
  3. do a complete(!) backup of this folder in case something goes wrong
  4. completely remove the folders "blocks", "chainstate", "sporks" and "zerocoin"
  5. download one of the snapshot-files (preferably the newest one) above into this folder
  6. unpack the snapshot file: 'unzip '
  7. the folders deleted above are now replaced by the ones from the snapshot
  8. restart your wallet and/or daemon
4- On this step you should be fully synced and on the right chain. Using the debug screen or pivx-cli, use the command
spork show 
to output your spork status. Have a look at spork 16 and make sure the value is 1510179528 (now 1609459199). If it is, go ahead and start staking.
If you are having trouble getting the correct value for spork 16, try adding nodes to your pivx.conf file that are protocol 70912. A list of 70912 nodes can be found at . This can be done from the debug menu or with pivx-cli by saying
addnode add 

Notable Changes

libzerocoin Exploit Fix

zPIV relies on a 3rd party library called libzerocoin. All currencies that utilize the zerocoin protocol use libzerocoin, and many of those currencies have been exposed to an exploit which allowed for the creation of multiple zero-knowledge spending proofs for one single zerocoin mint. The PIVX developers were able properly identify the exploit, track down any fraudulent spending proofs, link the fraudulent spending proofs with their one valid proof that they were mutated from, and remove any mints from the accumulators that were derived from the invalid spends.

zPIV Maintenance Mode Spork

Handling the above noted libzerocoin exploit required the PIVX team to immediately release a patched wallet to as many users as possible which rejected bad spends and also disabled all zPIV transactions in general. The process of releasing a patched wallet in such a small time frame is frustrating and difficult for all members of the PIVX team and especially users of PIVX. The PIVX developers have added a new spork which allows for zPIV transacting to be turned on/off without having to release a patched wallet. This will allow much smoother operation if any problems occur in the future, and should also allow exchanges and 3rd party services to continue to operate even if zPIV is in maintenance mode.

Accumulator Code Refactor

The zPIV accumulator code has undergone a major refactor. Accumulators are one of the most essential components of the zerocoin protocol, and also one of the most computationally expensive parts of the protocol. This refactoring speeds up syncing and spending of zPIV by over 5x. The new code also allows for spending of zPIV with only 2 required mints occurring on the network after your mint has been added, whereas before 3 were required. This refactor allows for lighter resource load and a smoother user experience.

Money Supply Indexing

The exploit in libzerocoin threw off some of the wallet's internal money supply calculations for both the zPIV supply and the PIV supply. User's wallet's will automatically recalculate the supply on block 908001. User's also have the ability to recalculate supply using the startup flag reindexmoneysupply.

More Extensive Tracking of zPIV Supply Through RPC

More information has been added to the getinfo and getblock RPC calls, which now display the total zPIV supply as well as the balance for each zPIV accumulator.

Multisig GUI

Provides functionality which is currently only available through raw transactions. Multisignature addresses require signatures from multiple parties before coins belonging to the address are spent. Accessed through the File dropdown menu.



  • Will I lose piv or zpiv?
    • No. Backup your wallet.dat again for good measure and never delete a wallet.dat file.
  • My wallet is stuck on block ?
    • Check if you're forked (Am I forked?) and then check if you're really on v3.0.5. If you're on the right version and chain, just hang tight and your wallet will find a good node to sync with eventually. Contact support if it's more than a few hours and the problem persists
  • My zPIV balance is incorrect
    • Contact support in discord or via the Support Portal. Please note that during the upgrade period and zerocoin maintenance mode there may be delays.
submitted by turtleflax to pivx [link] [comments]

such beginner shibe thread wow how to get coin

 how to shibecoin v rich in minutes much instruct so simple any doge can do 


UPDATE 1/21/14: I'm not updating this guide anymore. Most of the steps should still work though. See the wiki or check the sidebar for updated instructions.
Before you do anything else, you need to get a wallet. Until there's a secure online wallet, this means you need to download the dogecoin client.
Now open the client you just downloaded. You'll be given a default address automatically, and it should connect to peers and start downloading the dogechain (aka blockchain in formal speak). You'll know because there will be a progress bar at the bottom and at the lower right there should be a signal strength icon (TODO: add screenshots).
If you've waited 2 or 3 minutes and nothing is happening, copy this:
maxconnections=100 addnode= addnode= addnode= addnode= addnode= addnode=miner.coinedup.comdoge addnode= addnode= addnode= 
And paste it into a new text file called dogecoin.conf, which you then place into the dogecoin app directory.
Now restart your qt client and the blockchain should start downloading in about 1-2 minutes.
Once it finished downloading, you're ready to send and receive Dogecoins!


Decide how you want to get Dogecoin. Your options are:
I'll go into detail about each of these. I'm currently writing this out. I'll make edits as I add sections. Suggestions are welcome.


Mining is how new dogecoins are created. If you're new to crypto currencies, read this. To mine (also called "digging"), a computer with a decent GPU (graphics card) is recommended. You can also mine with your CPU, but it's not as efficient.


These instructions cover only Windows for now. To mine, you'll need to figure out what GPU you have. It'll be either AMD/ATI or Nvidia. The setup for both is approximately the same.

Step One: Choose a pool

There's a list of pools on the wiki. For now it doesn't really matter which one you choose. You can easily switch later.
NOTE: You can mine in two ways. Solo mining is where you mine by yourself. When you find a block you get all the reward. Pool mining is when you team up with other miners to work on the same block together. This makes it more likely that you'll find a block, but you won't get all of it, you'll have to split it up with others according to your share of the work. Pool mining is recommended because it gives you frequent payouts, because you find more blocks. The larger the pool you join, the more frequent the payouts, but the smaller the reward you get.
Over a long period of time the difference between pool and solo mining goes away, but if you solo mine it might be months before you get any coins.

Step two: Set up pool account

The pool you chose should have a getting started page. Read it and follow the instructions. Instructions vary but the general idea is:
When you're done with this, you'll need to know:

Step three: Download mining software

For best performance you'll need the right mining software.
Unzip the download anywhere you want.

Step four: Set up miner

Create a text file in the same folder as your miner application. Inside, put the command you'll be running (remove brackets).
For AMD it's cgminer.exe --scrypt -o stratum+tcp://: -u -p
For Nvidia it's cudaminer.exe -o stratum+tcp://: -O :
Substitute the right stuff in for the placeholders. Then on the next line of the text file type pause. This will let you see any errors that you get. Then save the file with any name you want, as long as the file extension is .bat. For example mine_serverName.bat.

Step five: Launch your miner

Just open the .bat file and a command line window should pop up, letting you know that the miner is starting. Once it starts, it should print out your hash rate.
If you now go to the pool website, the dashboard should start showing your hashrate. At first it'll be lower than what it says in the miner, but that's because the dashboard is taking a 5 minute average. It'll catch up soon enough.
NOTE: A normal hashrate is between 50 Kh/s up to even 1 Mh/s depending on your GPU.

You're now mining Dogecoins

That's it, nothing more to it.


CPU mining isn't really recommended, because you'll be spending a lot on more on power than you'd make from mining Dogecoin. You could better spend that money on buying Dogecoin by trading. But if you have free electricity and want to try it out, check out this informative forum post.


Trading has been difficult so far, but Dogecoin just got added to a few new exchanges. If you don't have a giant mining rig, this is probably the best way to get 100k or more dogecoins at the moment. I'll write up a more complete guide, but for now check out these sites:


Faucets are sites that give out free coins. Usually a site will give out somewhere between 1 and 100 Dogecoin. Every site has its own time limits, but usually you can only receive coins once every few hours, or in some cases, days. It's a great way to get started. All you do is copy your address from the receive section of your wallet and enter it on some faucet sites. Check out /dogecoinfaucets for more. If you go to each site on there you might end up with a couple hundred Dogecoin!


This method is pretty straightforward. Post your receiving address, and ask for some coins. Such poor shibe. The only catch is, don't do it here! Please go to /dogecoinbeg.


At the moment there are two tip bots:
Other redditors can give you Dogecoin by summoning the tip bot, something like this:
+dogetipbot 5 doge
This might happen if you make a good post, or someone just wants to give out some coins. Once you receive a tip you have to accept it in a few days or else it'll get returned. Do this by following the instructions on the message you receive in your inbox. You reply to the bot with "+accept". Commands go in the message body. Once you do that, the bot will create a tipping address for you, and you can use the links in the message you receive to see your info, withdraw coins to your dogecoin-qt wallet, see your history, and a bunch of other stuff.
As a bonus, so_doge_tip has a feature where you can get some Dogecoins to start with in exchange for how much karma you have. To do this, send the message "+redeem DOGE" to so_doge_tip. You'll need to create a tipping account if you don't have one.
If you want to create a tipping account without ever being tipped first, message either of the bots with "+register" and an address will be created for you.


  • 1/21/14 - Added note about this thread no longer being updated
  • 1/21/14 - Changed wallet links to official site
  • 12/27/13 - Added 1.3 wallet-qt links
  • 12/21/13 - Added new windows 1.2 wallet link
  • 12/20/13 - Fixed +redeem text
  • 12/18/13 - Added short blurb on trading.
  • 12/18/13 - Updated cudaminer to new version (
  • 12/18/13 - Fixed +redeem link
  • 12/18/13 - Updates dogecoin.conf, from here.
  • 12/17/13 - Linked to mining explanation.
  • 12/17/13 - Added link to CPU mining tutorial, in response to this.
  • 12/16/13 - Added links to tip commands, link to dogetipbot wiki.
  • 12/16/13 - Note about tip commands going in body, in response to this.
  • 12/16/13 - Added link to cgminer mirror, thanks to scubasteve812 and thanks to Bagrisham.
  • 12/16/13 - Note about removing brackets in response to this.
  • 12/15/13 - Fixed hash rate as per this comment, thanks lleti
  • 12/15/13 - Added info for all other ways of getting money, except for trading (placeholder for now)
  • 12/15/13 - Added windows GPU mining instructions 12/15/13 - Added wallet instructions, list of how to get money
submitted by lego-banana to dogecoin [link] [comments]

Bitcoin ABC 0.18.8 released!

Bitcoin ABC version 0.18.8 is now available from:
This release includes the following features and fixes: - dumpwallet now includes hex-encoded scripts from the wallet in the dumpfile - importwallet now imports these scripts, but corresponding addresses may not be added correctly or a manual rescan may be required to find relevant· transactions - getblock 2 (verbosity = 2) now returns hex values in transaction JSON blobs - Remove miner policy estimator in favor of minimum fees, also remove fee_estimates.dat. Old copies will be left in place. - The log timestamp format is now ISO 8601 (e.g. "2019-01-28T15:41:17Z") - Behavior change: in case of multiple values for an argument, the following rules apply: - From the command line, the last value takes precedence - From the config file, the first value takes precedence - From the config file, if an argument is negated it takes precedent over all the previous occurences of this argument (e.g. "foo=2 \n nofoo=1" will set foo=0) - The configuration files now support assigning options to a specific network. To do so, sections or prefix can be used: main.uacomment=bch-mainnet test.uacomment=bch-testnet regtest.uacomment=bch-regtest [main] mempoolsize=300 [test] mempoolsize=200 [regtest] mempoolsize=50 The addnode=, connect=, port=, bind=, rpcport=, rpcbind= and wallet= options will only apply to mainnet when specified in the configuration file, unless a network is specified.
submitted by jasonbcox to BitcoinABC [link] [comments]

How to Mine BiblePay on Windows

This guide is outdated, please refer to:
IMPORTANT - Evolution Upgrade:
Quick Start
Evolution Upgrade Information
Getting Started with Evolution
Generic Smart Contracts
What is BiblePay Evolution?
Windows Guide: 1. Download 32 or 64 bit .exe from 2. Double Click / Run .exe file and step through Install process 3. Run BiblePay 4. Click Tools >> One Click Mining, (Or set up mining manually with steps a through d below)
     a. Open File Explorer, in address bar type: %appdata%      b. Press Enter      c. Go to BiblepayEvolution folder      d. Open biblepay.conf file for editing, add lines and Save gen=1 genproclimit=1 
NOTE: addnode is used to give the wallet a starting node to connect to and sync with gen=1 turns on mining by default when the wallet is opened genproclimit=1 sets number of mining threads to 1 by default

5. Close BiblePay and Run it again 6. In BiblePay, go to Tools menu, Click Debug Console 7. Type these commands into the debug console:
getinfo getmininginfo help 
NOTE: getinfo will show you what block number your wallet is currently on and the version number getmininginfo will show you how many threads are running and how much mining hash you have help will show you all the other commands you can use

Threads: 8. To change number of threads to use up for mining
a. Edit %appdata%/BiblepayEvolution/biblepay.conf file: Find with File Explorer or inside the wallet go to Menu >> Tools >> Open Wallet Configuration File
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with the number of threads you want to use Open Task Manager to view CPU usage)

Using the Pool:
NOTE: To use the pool you must now use the external miner, not the wallet miner
  1. Set up an account on pool website:
  2. Create Worker Username(s) - Workers tab >>> Add (NOTE: Your Worker Username needs to be unique)
  3. Enable pool and add Worker Username in %appdata%/BiblepayEvolution/biblepay.conf file, add these lines:
    pool= workerid=insertWorkerUsernameHere
4. Restart BiblePay
How to Withdraw Coins From Pool? The pool holds onto your coins, go to "Account" >> "Withdraw" to withdraw your coins In your BiblePay Wallet go to "File" >> "Receiving Address" and you can right click and copy the address and paste it into the Pool's Withdraw screen as the "Destination Address", then click the "Withdraw" button and the coins will be sent from the Pool to your Wallet
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws
Why use a Pool? As the network hash rises (as more miners are mining), it can take longer and longer to solve a block, by using the pool, everyone works together with all of their hash power to solve blocks, and the reward gets split between everyone who contributed based on how much they contributed in hash.
With solo mining (not using the pool) it may take 1 month to finally solve a block and get large BBP reward, with pool you can get small frequent BBP rewards every ~30 minutes. (BBP meaning BiblePay coins)

How to Update: Download exe from and install again, your wallet will stay intact

Your wallet.dat stores your private keys that contain the access to your coins, this file is backed up every 24 hours in the backups folder, We also recommend that you save a copy of this file in other places, like a flash drive
Learn More about Backing Up your Wallet.dat

QUESTION: How long does it take for coins to mature? If you're solo mining, the coins become mature after ~100 blocks. If you're using the pool, they become mature after 24 hours
QUESTION: How do I know if I am currently mining? In your wallet >> In Top left Menu select "Tools" >> Click "Debug Console" Type in the command: getgenerate If it returns true, mining is turned on command: getmininginfo Will show how much "hashps" (hashing) your pc is doing, "genproclimit" will show how many mining threads you are using "poolmining" will be show value of true if you are successfully mining on the pool

How to Buy or Sell BBP coins?
You can buy and sell BBP coins for Bitcoin on the Exchanges we are listed on: SouthXChange:

Misc: Building headless Bitcoin and Bitcoin-qt on Windows

Windows Mining Video Tutorial by copper101great
submitted by togoshige to BiblePay [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
IMPORTANT - Evolution Upgrade:
Quick Start
Evolution Upgrade Information
Getting Started with Evolution
Generic Smart Contracts
What is BiblePay Evolution?
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./ #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: # 

NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

cd src ./biblepayd -daemon 
Your GUI program will be located in: /biblepay-evolution/src/qt
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

NOTE: To use the pool you must now use the external miner, not the wallet miner
  1. Set up an account on pool website:
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool= workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws


### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/
people make cron jobs and rsync automatically


Unofficial Bash Script

Official Ubuntu Package

Unofficial Ubuntu Package

Unofficial Mine in One Line


DOCKER IMAGES (NOTE: I havent tested these, use at your own risk)
submitted by togoshige to BiblePay [link] [comments]

F.Y.I. Syncing to UnitedBitcoin UBTC main net and performing desposits on exchange...

I'm sure some of you guys noticed that the compiled github sources wont be able to connect and sync to the mainnet at all. I do think this is/was intentional, but we can do it nevertheless.
We know their mainnet is alive since they have a block explorer showing miners, blocks and transactions already. ( Also they hav an electrum client out.
I was able to compile and sync node to main net by adding their electrum indexing nodes as core nodes, turns out they have a core daemon running on the same machines. The IPs are hardcoded from their electrum client wallet ( ... 
You can add them via cli:
./ubc-cli addnode IP_HERE:8333 "add" 
or by .conf file directives:
addnode= addnode= addnode= addnode= addnode= addnode= addnode= 
But here's the hitch: After that you are fully able to sync and import your private keys BUT you will only see dust like outputs of yours spendable on the main net. I already did a test transaction to an exchange that supports this shitcoin: (WARNINIG: as berepere pointed out this exchange wants KyC not on registration but after the fact at withdrawal)
The bigger UTXO of yours have been transferred to a 'foundation address' 31rZdrTpN57Wbfhg7xTPxeFGjEQaMBjxoo (check this thread )
This means, you wont be able to access your 'currently stolen' funds. They say they will release the Phase2 airdrop funds back again at 24th Jan but who knows.
So anyway, I just wanted you to know how to sync and run your node to be prepared for whenever this thing becomes tradable and accessible. Since there is already one exchange that supports this with deposits, its good to be prepared for when this goes 'live'.
submitted by willsteel to BitcoinAirdrops [link] [comments]

Trying to salvage some coins from 2013. Core (bitcoin-qt.exe v0.8.1-beta on Windows 8.1) is taking weeks to DL the blockchain as expected but keeps crashing now. Can I upgrade to a newer version without losing what I've gotten already (about 75% complete)?

Currently there are 134305 blocks remaining. When I start it up it works pretty smoothly for a while but then slows down. I leave it running while I'm gone but the last several days when I've come back it has crashed and gives me an I/O error, and I have to hit OK then start it back up. It does appear to be further along when I start it back up but not by a whole lot. So this has really slowed my progress. It's reindexed about 75% though, and so I don't want to start over from the beginning.
The drive it is on has ~400gb of free space so that's not the issue. I have 8gb of memory, and the task manager says bitcoin is taking up about 500mb, but it's using 60-85% of my cpu at a time.
If I download a newer version of core, I can just copy/paste the old wallet.dat file, right? But wouldn't it have to start downloading the entire blockchain again from the beginning? If so, is there any quicker method?
While typing this, it crashed twice. It only runs for about 10 minutes.
The version I have doesn't have any settings I can change. I read that there's a db size limit you can change in later versions that could help. This one does have a "debug window" with a command line console but I don't really know what to do with it. Here is a list of available commands: 
addmultisigaddress <'["key","key"]'> [account]
createmultisig <'["key","key"]'>
createrawtransaction [{"txid":txid,"vout":n},...] {address:amount,...}
getaddednodeinfo [node]
getbalance [account] [minconf=1]
getblocktemplate [params]
getnewaddress [account]
getrawtransaction [verbose=0]
getreceivedbyaccount [minconf=1]
getreceivedbyaddress [minconf=1]
gettxout [includemempool=true]
getwork [data]
help [command]
importprivkey [label] [rescan=true]
listaccounts [minconf=1]
listreceivedbyaccount [minconf=1] [includeempty=false]
listreceivedbyaddress [minconf=1] [includeempty=false]
listsinceblock [blockhash] [target-confirmations]
listtransactions [account] [count=10] [from=0]
listunspent [minconf=1] [maxconf=9999999] ["address",...]
lockunspent unlock? [array-of-Objects]
move [minconf=1] [comment]
sendfrom [minconf=1] [comment] [comment-to]
sendmany {address:amount,...} [minconf=1] [comment]
sendtoaddress [comment] [comment-to]
setgenerate [genproclimit]
signrawtransaction [{"txid":txid,"vout":n,"scriptPubKey":hex,"redeemScript":hex},...] [,...] [sighashtype="ALL"]
submitblock [optional-params-obj]

submitted by closer_to_the_flame to Bitcoin [link] [comments]

How can I make test-net?

I've tried to make test-net for mining pool test. There's no information or seed node for testnet. and find reddit and add testnet node to conf, but, testnode ip is very old , not working now. Is there latest information for make testnet? thanks,
my config also have a testnet=1 from searched community .
-- here's logs --
2018-03-12 13:38:46 Bitcoin version v0.14.2.5-6ad93ba 2018-03-12 13:38:46 InitParameterInteraction: parameter interaction: -whitelistforcerelay=1 -> setting -whitelistrelay=1 2018-03-12 13:38:46 Assuming ancestors of block ff983c72147a81ac5b8ebfc68b62b39358cac4b8eb5518242e87f499b71c6a51 have valid signatures. 2018-03-12 13:38:49 Default data directory /home/nomp/.myriadcoin 2018-03-12 13:38:49 Using data directory /home/nomp/nomp_chaindata/myriadcoin-test/testnet 2018-03-12 13:38:49 Using config file /home/nomp/nomp_chaindata/myriadcoin-test/myriadcoin.conf 2018-03-12 13:38:49 Using at most 125 automatic connections (1024 file descriptors available) 2018-03-12 13:38:49 Using 32 MiB out of 32 requested for signature cache, able to store 1048576 elements 2018-03-12 13:38:49 Using 2 threads for script verification 2018-03-12 13:38:49 scheduler thread start 2018-03-12 13:38:49 HTTP: creating work queue of depth 16 2018-03-12 13:38:49 Config options rpcuser and rpcpassword will soon be deprecated. Locally-run instances may remove rpcuser to use cookie-based auth, or may be replaced with rpcauth. Please see share/rpcuser for rpcauth auth generation. 2018-03-12 13:38:49 HTTP: starting 4 worker threads 2018-03-12 13:38:49 Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010) 2018-03-12 13:38:49 Using wallet wallet.dat 2018-03-12 13:38:49 init message: Verifying wallet... 2018-03-12 13:38:51 CDBEnv::Open: LogDir=/home/nomp/nomp_chaindata/myriadcoin-test/testnet/database ErrorFile=/home/nomp/nomp_chaindata/myriadcoin-test/testnet/db.log 2018-03-12 13:38:51 Bound to [::]:10898 2018-03-12 13:38:51 Bound to 2018-03-12 13:38:51 Cache configuration: 2018-03-12 13:38:51 * Using 2.0MiB for block index database 2018-03-12 13:38:51 * Using 8.0MiB for chain state database 2018-03-12 13:38:51 * Using 440.0MiB for in-memory UTXO set (plus up to 286.1MiB of unused mempool space) 2018-03-12 13:38:51 init message: Loading block index... 2018-03-12 13:38:51 Opening LevelDB in /home/nomp/nomp_chaindata/myriadcoin-test/testnet/blocks/index 2018-03-12 13:38:59 Opened LevelDB successfully ... 2018-03-12 13:43:39 keypool added key 100, size=100 2018-03-12 13:43:42 keypool added key 101, size=101 2018-03-12 13:43:43 keypool reserve 1 2018-03-12 13:43:44 keypool keep 1 2018-03-12 13:43:50 wallet 282608ms 2018-03-12 13:43:50 setKeyPool.size() = 100 2018-03-12 13:43:50 mapWallet.size() = 0 2018-03-12 13:43:50 mapAddressBook.size() = 1 2018-03-12 13:43:51 UpdateTip: new best=0000017ce2a79c8bddafbbe47c004aa92b20678c354b34085f62b762084b9788 height=0 version=0x00000002 algo=0 (sha256d) log2_work=17.678071 tx=1 date='2014-02-20 06:06:33' progress=0.000003 cache=0.0MiB(0tx) 2018-03-12 13:43:51 mapBlockIndex.size() = 1 2018-03-12 13:43:51 Failed to open mempool file from disk. Continuing anyway. 2018-03-12 13:43:51 nBestHeight = 0 2018-03-12 13:43:51 torcontrol thread start 2018-03-12 13:43:51 AddLocal(x.x.2x.x:10898,1) 2018-03-12 13:43:51 Discover: IPv4 enp3s0: 175.2x.x.x 2018-03-12 13:43:51 init message: Loading addresses... 2018-03-12 13:43:51 ERROR: Read: Failed to open file /home/nomp/nomp_chaindata/myriadcoin-test/testnet/peers.dat 2018-03-12 13:43:51 Invalid or missing peers.dat; recreating 2018-03-12 13:43:52 init message: Loading banlist... ... 2018-03-12 13:55:05 addcon thread start 2018-03-12 13:55:05 opencon thread start 2018-03-12 13:55:05 dnsseed thread start 2018-03-12 13:55:05 net thread start 2018-03-12 13:55:05 connect() to failed after select(): Connection refused (111) 2018-03-12 13:55:06 connect() to failed after select(): Connection refused (111) 2018-03-12 13:55:16 Loading addresses from DNS seeds (could take a while) 2018-03-12 13:55:17 3 addresses found from DNS seeds 2018-03-12 13:55:17 dnsseed thread exit 2018-03-12 13:55:17 connect() to failed after select(): Connection refused (111) 2018-03-12 13:55:18 connect() to failed after select(): Connection refused (111) 2018-03-12 13:55:22 connect() to failed after select(): Connection refused (111) 2018-03-12 13:55:23 connect() to failed after select(): Connection refused (111) 2018-03-12 1 ....
same forever until today. can't encrease test node heights.
submitted by trustfarmhub to myriadcoin [link] [comments]

Having Connection Errors?

Those facing difficulty connecting to the network during initial the sync:
  1. Visit this link.
  2. Pick one of the IP addresses listed.
  3. Execute the following command using the MicroBitcoin CLI, or in the QT wallet's debug window:
addnode SELECTED_IP_HERE add
The application should find and connect with peers on the network. See wiki post here.
submitted by microbitcoinorg to MicroBitcoinOrg [link] [comments]

[PoSV] Release Candidate 2, Chess and Future

Dear fellow Reddheads:
In this post, I'm going to cover three topics: PoSV Release Candidate 2, a review of the current strategic position of Reddcoin and update on upcoming milestones.

PoSV Release Candidate 2

PoSV RC2 binaries are now available for download here . This is for testnet only. You shouldn't have to re-sync blockchain. Just replace existing RC1 wallet with RC2 and start it with testnet=1 addnode=
Please run full nodes for staking, post your testnet wallet addresses, send each other coins and report any problem and bug below.

Current Strategic Position

With official release of PoSV around the corner (in a few weeks), it's good time to review the strategic position Reddcoin is in today. If you are a good player of chess or Go, you'd understand that to win a game, one has to build up advantage incrementally through each move. So where are we today?
  1. PoSV was designed to address multiple technical and economic issues as described in the white paper. It'll provide better network security and better aligned economic incentives among participants. It renders mining and ASIC obsolete. It rewards active stakeholders and provides a solid foundation for our ecosystem.
  2. All the existing vanilla PoS coins, to my best knowledge, trace their source code to Peercoin which was a fork from Bitcoin in 2012. The code base of Bitcoin has been under active development since then and few, if any, new features in Bitcoin made it to the code base of vanilla PoS. By comparison, PoSV has been implemented based on Reddcoin release which already contained hundreds of commits from upstream Bitcoin. PoSV is uniquely positioned among all PoS coins to absorb any innovation in Bitcoin in the future. This gives us huge competitive advantage over time.
  3. Because PoSV has been written based on a different code base, I had to understand every single line of code in existing PoS and now have a very thorough understanding of the technical details. This allows us to gradually introduce more features to PoSV in the near future. This stands in stark contrast with coins which follow a fork-and-tweak-and-desert model.
  4. I've written PoSV in a way that deters copycats.
  5. Our next-generation social wallet is designed to work in synergy with PoSV to encourage user activities. It has a sleek GUI and built-in functionalities such as news feed and chat. It can also connect to remote daemons to provide better user experience for running full nodes.
  6. ReddAPI allows developers to create 3rd-party applications without having to deal with low-level blockchain details.
  7. The success of getting Reddcoin listed on Mintpal by mere voting demonstrates beyond any doubt the quality, will and power of our community. When we set our eyes on a goal, we work together and make it happen.
  8. Reddcoin is created for a niche market: to facilitate social interactions between people. It's a very ambitious project with a lofty goal. It's also like a giant jigsaw puzzle. As the dev team and the community continue to make progress on putting the major pieces in place, the entry barrier is increased on a daily basis.

Future Milestones

  1. I will officially release PoSV in coming weeks. New features for PoSV are already being planned for later releases.
  2. MathyV is spearheading the efforts to merge innovation from Bitcoin. Most notably we will see Hierarchical Deterministic Wallet and Multi-signature Wallet. Reddcoin will be one of the very first altcoins to provide these features.
  3. hoppipoppipolla is preparing the final release of the social wallet.
  4. lionzeye released the beta of Reddcoin plugin for Minecraft using ReddAPI and there is already a Minecraft server up and running. The project requires technical innovation and business acumen. If done right, the efforts will bear much fruit.
  5. I'm writing our next-generation social platform. Reddheads have shown us the most wanted social networks and they will be delivered. The social platform will also enjoy integration with our social wallet to provide the best social experience.
  6. devhen has been working on our social broadcast platform, which will be packaged and pitched to corporate clients for their online marketing campaigns.
  7. When it comes to marketing, the first priority is always to build the best possible products, to make products speak for themselves. We have commissioned a world-class video creator to work on our official video. Thanks to the extreme attention to details by Reddcoin, BTCillionaire and reddki, you won't be disappointed by the final results. We also have established and on-going dialogues with several PR firms.

Final Words

Great things take time to build. Patience and perseverance are valuable because they are rare. Less obsession with price. More productive usage of time. Together we can build a future that's worth living for.
submitted by laudney to reddCoin [link] [comments]

Gridcoin Developer Update April 23rd, 2018

Hello folks and welcome to another Developer Update from the Gridcoin team. I'd like to remind everyone that these posts will be created every two weeks unless a wallet update is pending that week.
These last two weeks, developers have been preparing for an upcoming leisure update and finalizing fixes currently in staging branch. Testnet has been busy as well testing various new features and verifying fixes. Some of the pull requests these last two weeks have included:
In addition to the PRs listed above, @ifoggz has been working with the testing team to improve performance and better handle errors in the current Windows neural network implementation. So far these tests have been positive and show greatly improved consensus among neural nodes. In particular an issue was found when the downloaded gz files from project sites were incorrectly formatted. In the past, the NN would simply accept the bad data and try to use it for calculations resulting in wildly inaccurate magnitudes and hashes. The new improved NN code will recognize badly formatted project data files and prevent their bad data from being included in NN calculations. The new NN code will also try to redownload the excluded bad data on the next sync.
I would like to thank personthingman2 for all his help assisting in this testing.
I would like to add a quick update on testnet. I gave a "Introduction to Testnet" talk on the last Fireside podcast. Thanks to @jringo for having me and I look forward to hearing the edited audio once it is finalized. The goal of this talk was to educate people about testnet and bring new testers on board.
Thanks for reading this edition of the Developer Update. Expect to see another update two weeks from today (5/7), barring a wallet update around that time. If you have any comments or questions for the Gridcoin development team feel free to ask in the comments below. If I am not able to answer your question directly, I can certainly forward it to someone who can! Thanks everyone!
submitted by barton26 to gridcoin [link] [comments]

Hey everyone. MacOS Mooncoin Core wallet now available.

So I've put this on bitcointalk, telegram and discord -- Finished a working build of the Mooncoin Core wallet for Mac OSX... mostly because nobody else was stepping up to do it and I kept on seeing demand for it every week.
It's based on fixes from Bitcoin's repo, and forked off of 0.13.9-segwit (since I don't have access to commit anything to the original mooncoin repo.)
The changes made are visible in my repo, rather minor syntactical changes to allow it to compile under Boost 1.66 on Mac OS X; I've tested it under El Capitan, so it'd be good to get some people to try it under Sierra and High Sierra.
It's labeled as pre-release just because who knows if I missed a bug, but I've done several transactions in both directions with it, as well as importing existing wallets and backing them up, all without a hitch -- it's connecting to peers and syncing with no troubles as well. (Make sure to create a mooncoin.conf with addnode statements from one of the mooncoin block explorers in it to find peers faster!!)
submitted by michidragon to MoonCoin [link] [comments]

ANN - RENESIS - LTME (Long Term Mining Evolution)

ANN - RENESIS - LTME (Long Term Mining Evolution)
LTME ( Long Term Mining Evolution) With ASIC Resistance Promise hav0k, The Renesis Core

Renesis Specifications:

Algorithm: Renesis Ticker: RESS Whitepaper v1: Block Time: 2 minutes Block Reward: Variable. Refer to whitepaper for reward structure. Halving: Yes Doubling: Yes Mined Confirmations PoW/PoS : 60 TX Confirmations: 10 Minimum RX confirmations to forward: 1 Total Coin Supply: 350M for Proof of Work PoS Cap: No PoS Stake Reward: 10% per year Pre-mine: Yes ( First 100 Blocks mined on low difficulty with CPUMiner) Bounties Available: Yes - From Premine Rewards Available for Community Developers: Yes, from Premine CPUMiner Available: Yes - Windows binary & source. NVIDIA GPUMiner Available: Yes ( Reward for fair release of GPUMiner is paid! 50,000 RESS ) AMD GPUMiner Available: No ( Reward for fair release of GPUMiner is > 12,000 RESS ) Renesis New Logo Design Competition: Yes ( Reward of 2000 RESS ) Renesis QT Wallet Theming Competition: Yes ( Reward of 5000 RESS ) Renesis V2 Static Website Design Competition: Yes ( Reward of 7000 RESS ) Renesis public Pool addition reward: Yes (10000 RESS) - First 3 Pools. Renesis Node Hosting: Yes ( Reward of 1000 RESS offered for 1 month of hosting ) Translation Bounties: Yes ( Reward of 500 RESS per translation posted ) Social Media Bounties: Yes ( Connect with us on our channels for information ) ICO: No - Bitcoin Talk ANN for everyone to mine starting 101 block Masternodes: Planned MainNet P2P port: 9775 MainNet RPC port: 9774 TestNet P2P port: 19775 TestNet RPC port: 19774
Renesis Development Team : hav0k - 2 developers Group : The Renesis Group ( Visit for profiles ) - 7 members Web Site: Block Explorers: - Reddit: Connections: Discord, Telegram, Slack ( Visit to connect ) Will have web wallet: No - We believe coins should be safe in your wallets not online. Pools: To be announced after announcement. Exchanges: To be announced.

Pools: 10000 RESS Reward TX : 10000 RESS Reward TX: 10000 RESS Reward TX:


addnode addnode addnode addnode addnode ( Node by CryptoHobo. 1K RESS every month . TXID : 1e7a332788bceb23438b783dac172c853804d51443f43a1d68b378447981059f - 22 July 2018 addnode addnode addnode addnode addnode renesisckko455xx.onion add ( Tor Node )
Terms & Conditions for GPUMiner Releases : Developers must release the mining software + source after brief testing to Renesis Group to claim their reward. The group will immediately upload the GPUMiner with sources on github after mining 2 test blocks and will provide proof to community. If GPUMiner software is released directly to the community then it would fair but there will be no reward for software developers.


At the time of announcement, you can mine solo until pools become available. Download the CPUMiner binary or source from github with a wallet Place the renesis.conf in your wallet data directory and (re) start wallet. Run start.bat file inside CPUMiner bin folder to mine Renesis. You can edit the start.bat file to edit the number of threads for mining. If you wish to mine on a pool then use the poolmine.bat file.
Note: Please be advised that the cpuminer.exe can show up as a virus on Windows just like almost all mining software. You can be assured it is not and is labelled as coin miner, CpuMiner (PUA) or malware. Refer to virustotal report here . You can safely verify your Claymore and EWBF CUDA miners at virustotal and they will give similar results. If you feel that it has a virus then please do not mine. Virustotal scan for Windows wallet is : .For questions related to GPUMiner releases, please ask fellow miners or their respective developers when their releases become available for download.
UPDATE: CCMINER Download : Reward of 50000 RESS paid to user A1 on Discord :
Special thanks to mrM4D for his guidelines on CPUMiner build. Cheers to ocminer, mrM4D and Epsylon3 Greets to: SCRIV, RavenCoin for their game changing innovations and ASIC resistance commitments.


Phase 1
Renesis Release Development - done CPUMiner Development - done Generate the premine - done Announcement - Underway Community Developers - 3 required and backed by funding from premine. Update: 1st Dev joined the dev team GPUMiners for AMD - Awaited and backed by rewards for fair release by developers. Masternodes Solution - TBA by developers and community consensus and backed by rewards from premine. ASIC Survey - Planned Rensis Hash Enhancement - Planned. TBA under phase 2 or after ASIC Survey Renesis Holdings Fund - Planned
Phase 2 - Next
Good things coming here =) Real use case 1 - Planned Real use case 2 - Planned To be announced after completion of Phase 1
Phase 3 - Planned
Online Gaming - Planned
Phase 4 - Planned
To be announced after completion of Phase 3
submitted by dev_hav0k to Renesis [link] [comments]

I'm running a full node on a $20/month VPS

I rented this VPS to stream media from my seedbox but I won't be using it 100% of the time so I thought about running a full node, kinda like timeshare. It has 1Gbps and 5TB limit per month. It costs me $20/month (they do accept Bitcoin as payment, yay!)
You can use addnode (in bitcoind config) to add my node: . Also check uptime here: (Bitcoin address is also there if you want to help me out)
The node is using latest version of bitcoind (0.11.0).
Edit: I'm using Dediseedbox VPS small, 400 GB. I also have a seedbox with them, for $15/month with 400gb and unlimited everything else.
Edit 1: I do have a Raspberry Pi running full node at home, I do not use wallet on any of my full nodes as I already have a Trezor
submitted by ppkhoa to Bitcoin [link] [comments]

Decentralized blockchain marketplace needs beta-testers and merchants.

Download beta here for Mac and Win:
This is a beta only running on a test blockchain called cakenet.
You will need to add a config file with these nodes: addnode= addnode=
You can mine test coins or contact us for seed coin.
Features needing testing:
We're looking for feedback and/or merchant partners.
Feedback/more info/support is available on Slack (you may require an invite)
or through Twitter @syscoin
or here on Reddit
submitted by Keyare to CryptoCurrency [link] [comments]

Bitcoin cash blockchain craziness (missing BCC)

Before doing anything with BCC, I transferred my BTC from one bitcoin address (old address) to another (new address), a total of 2.05 BTC. I only had one address in my wallet (old address) when I started.
So, I installed the Bitcoin ABC client and completely synched with the Bitcoin Cash blockchain, after copying my blockchain data from the core data directory, addnode'ng the Bitcoin Cash nodes to the .conf file, starting with a brand spanking new fresh wallet, and issuing the following command to pick up the correct blocks after the fork:
invalidateblock 00000000000000000019f112ec0a9982926f1258cdcc558dd7c3b7e5dc7fa148 
I then proceeded to import my (old address) private key:
importprivkey ... 
..., into Bitcoin ABC and waited (patiently) for the rescan to complete.
The crazy part: I was 1 BCC short - it showed 1.05 BCC instead of 2.05 BCC. So, I went back into my core wallet, copied the entire list of transactions to a spreadsheet and compared them to the list of transactions in the ABC client to see what the heck happened.
The ABC client transaction list shows two 0.5 BTC withdrawals (from the old address) circa 2016, that never happened and this is the reason that I am 1 BCC short in the end.
I don't know how this is possible. The withdrawals were all from around mid to late 2016, way before this fork happened, and that part of the blockchain is common to both. Since I was able to transfer the entire 2.05 BTC from my old BTC address to a new BTC address before I started, with >10 confirmations, I definitely know that I had 2.05 BTC at the old address, the only address I used until after the fork.
If anybody has any ideas on how this is possible, or what steps I should take next to reconcile my BCC amount with my BTC amount pre-fork, I am all ears.
submitted by mikegold10 to BitcoinABC [link] [comments]

How to add bootstrap to LitecoinCash LCC wallet How To: add a node to the iop core wallet How to make your Bitconnect QT wallet sync on Mac PotCoin wallet update POSv WINDOWS Lindacoin - adding nodes to the wallet for connections

There are two variations of the original bitcoin program available; one with a graphical user interface (usually referred to as just “Bitcoin”), and a 'headless' version (called bitcoind).They are completely compatible with each other, and take the same command-line arguments, read the same configuration file, and read and write the same data files. Bitcoind – a daemon program that implements the Bitcoin protocol, is controlled through the command line. It is one of the main components of the Bitcoin network node software. Bitcoin software exists in two forms: a GUI application and a background application (daemon on Unix, service on Windows). Bitnodes uses Bitcoin protocol version 70001 (i.e. >= /Satoshi:0.8.x/), so nodes running an older protocol version will be skipped. The crawler implementation in Python is available from GitHub (ayeowch/bitnodes) and the crawler deployment is documented in Provisioning Bitcoin Network Crawler. addnode= addnode= addnode= addnode=445.773.194.266 Method 1: Adding nodes from wallet debug console. You need to check this guide on QT core wallet where we’ve explained about debug console window. Example bitcoin.conf. The bitcoin.conf file allows customization for your node. Create a new file in a text-editor and save it as bitcoin.conf in your /bitcoin directory.. Location of your /bitcoin directory depends on your operation system.. Windows XP C:\Documents and Settings\<username>\Application Data\Bitcoin Windows Vista, 7, 10 C:\Users\<username>\AppData\Roaming\Bitcoin

[index] [33319] [3666] [1275] [24362] [1821] [28417] [12912] [18135] [18372] [25438]

How to add bootstrap to LitecoinCash LCC wallet

What is a Bitcoin Node? - Step by Step Explanation - Duration: 5:47. ... Lindacoin- How to install the lindacoin wallet once downloaded 2/5 - Duration: 1:52. Oxfish Crypto 3,260 views. Get your wallet at the site. ... You'll have to open the console and add each active node one at a time with the command "addnode add" (Minus quotes, just change the IP ... Remember Download the Wallet and Bootstrap from here: to get more peers/connections add the next lines to your config file. addnode= this video shows how to add a node to the iop core wallet, if you have problems with the blockchain synchronization special thanks to @klewer _____ **Community Resources:** addnode onetry Done, your wallet will sync from alone! ... Getting your Private Keys from the Bitcoin Core wallet - Duration: 5:11. Bitcoin Daytrader 38,132 views.